Por favor, use este identificador para citar o enlazar este ítem:
http://cicy.repositorioinstitucional.mx/jspui/handle/1003/3127| Preparation and characterization of extruded PLA films coated with polyaniline or polypyrrole by In situ chemical polymerization | |
| José Ramón Flores Leon Jesus Manuel Quiroz-Castillo Dora Evelia Rodríguez Félix MARIA MONICA CASTILLO ORTEGA ANA DAYMI CABRERA GONZALEZ CLAUDIA GEORGINA RAMIREZ MENDOZA Hisila Santacruz GUILLERMO SUAREZ CAMPOS JESUS LEOBARDO VALENZUELA GARCIA Pedro Jesús Herrera Franco | |
| Acceso Abierto | |
| Atribución-NoComercial-SinDerivadas | |
| https://doi.org/10.1021/acsomega.3c07201 | |
| BIOPOLYMERS ORGANIC POLYMERS PLASTICS POLYMERIZATION POLYMERS | |
| Conductive polymers, such as polypyrrole and polyaniline, have been extensively studied for their notable intrinsic electronic and ionic conductivities, rendering them suitable for a range of diverse applications. In this study, in situ chemical polymerization was employed to coat extruded PLA films with PPy and PANi. Morphological analysis reveals a uniform and compact deposition of both polyaniline and polypyrrole after polymerization periods of 3 and 1 h, respectively. Furthermore, the PLA–PANi-3h and PLA–PPy-1h composites exhibited the highest electrical conductivity, with values of 0.042 and 0.022 S cm–1, respectively. These findings were in agreement with the XPS results, as the polyaniline-coated film showed a higher proportion of charge carriers compared to the polypyrrole composite. The elastic modulus of the coated films showed an increase compared with that of pure PLA films. Additionally, the inflection temperatures for the PLA–PANi-3h and PLA–PPy-1h composites were 368.7 and 367.2 °C, respectively, while for pure PLA, it reached 341.47 °C. This improvement in mechanical and thermal properties revealed the effective interfacial adhesion between the PLA matrix and the conducting polymer. Therefore, this work demonstrates that coating biopolymeric matrices with PANi or PPy enables the production of functional and environmentally friendly conductive materials suitable for potential use in the removal of heavy metals in water treatment. | |
| 2023 | |
| Artículo | |
| ACS omega, 8(45), 43243-43253, 2023. | |
| Inglés | |
| Flores León, J. R., Quiroz Castillo, J. M., Rodríguez Félix, D. E., Castillo Ortega, M. M., Cabrera-González, A. D., Ramirez-Mendoza, C. G., ... & Herrera-Franco, P. J. (2023). Preparation and Characterization of Extruded PLA Films Coated with Polyaniline or Polypyrrole by In Situ Chemical Polymerization. ACS omega, 8(45), 43243-43253. | |
| PROPIEDADES DE LOS MATERIALES | |
| Versión publicada | |
| publishedVersion - Versión publicada | |
| Aparece en las colecciones: | Artículos de Investigación Arbitrados |
Cargar archivos:
| Fichero | Tamaño | Formato | |
|---|---|---|---|
| 2023_Jose_Flores.pdf | 3.07 MB | Adobe PDF | Visualizar/Abrir |